Carrier operating and maintanance Specifikace stáhnout pdf (Strana 76)

5-376-000097

REV. 1 - 12/08

Section II: Operation

Page 66

"L" ARM GRID OPERATION

1. Set the grid width as required for

the casualty vehicle to be towed.

2. To set the grid width, loosen the

"T" handles on the front of the

grid arms and pull out. Be sure

both grids are as close to the

center of the boom as possible,

and wide enough to allow the L-

Arms to slide into their channels.

Tighten the "T" handles to secure

the grids.

3. Retract the "Cam" handle

locking pin on the grid by turning

it 180°. It should remain in the

open position.

"T" HANDLE

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 115 116

Komentáře k této Příručce

Žádné komentáře